You are here: / / Enclosures for functional integrity

Functional integrity according to DIN 4102-12

The cabling of modern buildings presents planners and architects with greater challenges than 20 years ago. The number of electrical consumers has increased significantly. At the same time, the requirements for functional protection in the event of a fault or fire have increased significantly.
With the P90 series,swibox has developed a portfolio of connection and junction boxes that all fulfil the high demands placed on modern and safe electrical installations.

Conventional cabling

Connection housing in accordance with DIN 4102-12 for extending and connecting electrical cables. Each fire compartment is supplied with its own supply cable. This leads to a high fire load in the supply shaft and is also associated with high installation and cost expenditure, as many cables have to be laid.

1
2
3
4
5
6
7
8
9
10
1

Junction box swibox P00

2

Connecting
enclosure swibox P00

3

Junction
enclosure swibox P00

4

Connecting
enclosure swibox P00

5

Junction
enclosure swibox P00

6

Connecting
enclosure swibox P00

7

Connecting
enclosure swibox P00

8

Connecting
enclosure swibox P00

9

Connecting
enclosure swibox P90

10

Connecting
enclosure swibox P90

1
1

In the event of a fire, the power supply in the fire compartment is interrupted.

The swibox solution

The junction boxes are designed in accordance with DIN 4102-12 and EN 61439. Functional integrity is guaranteed, as the branch circuit is safely switched off in the event of a fault or fire. The fuse is accessible from the outside. The material and installation costs are approx. 30% lower, as considerably fewer cables are used.

1
2
3
4
5
6
1

Branch-off
enclosure swibox P00 with secured branch

2

Branch-off
enclosure swibox P00 with secured branch

3

Branch-off
enclosure swibox P00 with secured branch

4

Branch-off
enclosure swibox P00 with secured branch

5

Connecting
enclosure swibox P90

6

Connecting
enclosure swibox P90

 

1
2
3
1

Junction box with functional integrity. In the event of fire, continued operation of electrical consumers is guaranteed.

2

Junction box with functional integrity. In the event of fire, continued operation of electrical consumers is guaranteed.

3

Junction box with functional integrity. In the event of fire, continued operation of electrical consumers is guaranteed.

Connection enclosure swibox E90

Plastic E90

Go to the products

Sheet steel E90

Go to the products

Stainless steel E90

Go to the products

Junction box swibox E90

Plastic E90

Go to the products

Sheet steel E90

Go to the products
Edelstahlbox EI90

Stainless steel E90

Go to the products

UCB-Box E90

The swibox P90 UCB box is made of stainless steel V2A (1.4301). The enclosure is designed to accommodate electrotechnical components in accordance with EN 61439. The electrical connection is suitable for a maximum of 35 mm ² and 5-pole feed-through.
In the event of fire, the branch is switched off by a thermal switch. The sockets are protected by circuit breakers. The ceramic terminals and the thermal switch are structurally separated from the other electrical components and thus protected from stray parts.
The enclosure is closed by two sash locks. The electrical wiring is covered by metal sheets. These are provided with cut-outs to accommodate sockets and fuses.

Feed-through enclosure Functional integrity

  • Protection class: IP66
  • Impact resistance: IK10
  • Dimensions of enclosure: H 395 x W 185 x D 150 mm
  • Ambient temperature: – 25°C + 50°C
  • Enclosure: Halogen-free
  • Colour code: RAL 2003
  • Enclosure material: Powder-coated steel,
    Alternative: Stainless steel, powder-coated
  • Sealing range: Ø 10 mm to Ø 52 mm
  • Rated voltage: 400V AC
  • Insulation base Vrms, 50Hz: 1kV
  • Rated current: 16A
  • Piercing terminals Clamping range in feed-through 16 – 50 mm²
    Clamping range in branch 1.5 – 10 mm²
  • Steatite spacer
  • External fixing lug
  • Cover holder
  • Cover loss protection
Go to the Products

Elektrant swibox P90 with functional integrity E90 to DIN61439

An electrant is a device for drawing off electrical energy, analogous to a hydrant, which is used to draw off water. Electrants are used, for example, in the railway sector as a service component of the local railway infrastructure.
Electrants with a functional integrity of up to 90 minutes are also used as part of the safety system for railway tunnels. In tunnelling areas, swibox electrants form the central interfaces for reliably supplying electrical rescue equipment, tools or lighting with power.
The swibox solutions are optimised for the specific requirements in each case, such as high pressure and suction forces, fire or other external influences.

Properties

  • Supply cable: Up to 5 x 35 mm² E90
  • Functional integrity E90 in continuity

Enclosure

  • External dimensions: H 700 x W 400 x D 155 mm
  • Intermittent pressure-tight
  • Pressure and suction resistant
  • Door locked when open

material

  • Stainless steel 1.4301 V2A
  • Powder-coated sheet steel

Fitting example

  • 2 x earthed socket outlet 16A 230V
  • 1 x CEE socket outlet 16A 400V
  • 1 x CEE socket outlet 32A 400V

Fuse example

  • 2 x C-automatic 16A
  • 1 x C-automatic socket 16A
  • 1 x C-automatic 32A
  • 1 x RCD

You have questions? Send us an e-mail.